How To Fix Samsung Smart Tv Remote Not Working – Here’s The Simple Methods

Samsung Smart Tv Remote Not Working

Samsung Smart Tv Remote Not Working: Samsung is one of the biggest TV factories in the world. They also make a lot of TV accessories. Even though they are pioneers in this field, they can not do everything without mistakes. Sometimes their remote controls break and bugs occur to them. When you buy a Samsung TV, along with other tools and manuals, you have the opportunity to find a remote control that can operate the TV. Samsung remote and accessories are generally reliable, but they may encounter some issues at some point. A common problem is finding that your remote control is no longer working or that your TV is not responding when you press the remote buttons.

Some of the factors that affect the functionality of your TV remote control are dirt, weak/bad batteries, problems with the remote and infrared sensors on the TV, etc. The best way to fix your Samsung remote is to identify the cause in advance of the problem. In some cases, you may notice that some buttons do not respond when you press them or that the TV does not pick up signals from your remote. In this article, you will find some of the reasons why your best Tv Samsung remote may not respond and the steps you need to take to diagnose and fix the problem.

Methods To Fix The Samsung Smart Tv Remote Not Working:

  • Replace the Samsung TV Remote’s Battery
  • Discharge your Remote
  • Check if the TV’s Infrared Sensor is obstructed
  • Check if the Remote’s Infrared Emitter is Faulty
  • Clean you’re remote further

1. Replace The Samsung TV Remote’s Battery:

The first troubleshooting step a Samsung Smart TV user should try if they are having connection problems with their Samsung TV remote is to check the battery. Although the TV remote has a very long battery life, AAA batteries lose charge over time and need to be replaced every two months. The smart TV remote is powered by AAA batteries embedded in the back of your remote control. If you never replace your remote batteries and your remote stops working, it will need to replace the batteries. To remove the battery cover on your Samsung TV remote, you must rotate it.

Replace The Samsung TV Remote’s Battery

Find the battery cover dimple that you can use to see the back of your remote and hold the cover. You can find the down arrow printed on the back of the remote. Press and hold this arrow with your thumb and push down. It should pop the battery cover to expose the battery compartment. Next, we need to remove the old batteries from the battery holder and replace them with new ones. Most TV remotes use AAA batteries, but check the markings printed on the inside of the battery compartment to see what type of batteries are agreeing with your remote.

2. Discharge Your Remote:

Discharge Your Remote

If this does not work, the problem may be due to an error in the TV remote. To clear the malfunctions in the Samsung TV remote electronic circuits, you can try resetting your remote control. First, you need to remove the battery cover and both batteries. After that, you have to rotate the remote and press and hold any button for 20 seconds. This allows the remote to be fully discharged. Next, reinsert both batteries into the remote. This clears any software or hardware glitch when using your TV remote.

3. Check If The TV’s Infrared Sensor Is Obstructed:

Check If The TV’s Infrared Sensor Is Obstructed

If your remote control does not work, your TV may have an infrared sensor barrier. TV remotes work by radiating a small beam of infrared light detected by the sensor into your TV. In Samsung smart TVs, this sensor is located at the bottom of the TV. For some, it will be in the center-right below the Samsung logo, for other Samsung Smart TVs this sensor will be placed at the bottom right of the TV. Do not cover it or block it in any way or the TV will no longer detect your remote. When using your remote, make sure you point it towards this sensor. If you have a coffee table in front of the TV, make sure it does not block the line of sight between the remote and the TV.

4. Check If The Remote’s Infrared Emitter Is Incorrect:

Check If The Remote’s Infrared Emitter Is Incorrect

The problem can be caused by an infrared emitter error. Here’s how to check it. Although human eyes cannot see infrared light, digital cameras can. Get a digital camera or smartphone and open the Camera app. Point it at the Infrared LED on the top of the TV remote and press the button. If you can see the light emitted by the camera, the infrared emitter is working. However, if it is not flashing through the LCD screen of your phone or camera, your TV remote may be faulty. Contact Samsung Support or buy a new TV remote.

5. Clean You’re Remote Further:

Clean You're Remote Further

Next, if the above tip does nothing, you may need to clean your remote. In some cases, wiping the buttons along with their outer surface is sufficient to remove dirt. But sometimes, it can take longer than that. Yes. You will need to disassemble your device before cleaning it properly. First, press on the remote back cover of your remote. Gently press it in the direction of the arrow. Then remove its batteries. Next, you need to unplug your Samsung TV remote. It can be very complicated. So be careful not to break or injure any parts while doing this.


These are just some of the common troubleshooting steps to take to resolve issues with your Samsung TV remote. If those steps do not solve your problem, your TV remote or smart TV may also be defective and may need to be repaired or replaced. Replacing both the TV remote is very easy, so try buying a new TV remote to see if it fixes the problem. If the problem persists with the second Samsung Smart TV remote, there is a possibility that something is wrong with your smart TV. If this happens, contact Samsung Support for further instructions and repairs.


Related Post

Leave a Reply

Your email address will not be published. Required fields are marked *