Nowadays people depend on mobile phones for almost everything – for example, shopping, banking, gaming, photography, and messaging. But since they are so inevitable, we are very careful about the battery levels. It is not uncommon for phones to accidentally fall into the water. It can leave water in your charging port in the bathroom, swimming pool, kitchen, or anywhere on the beach. Most latest phones are water-resistant and will not be damaged by moisture.
Having water in your charging port can damage your phone a lot, as it prevents your phone from being charged and powered directly. Not to mention the fact that it injects water directly into the interiors of your latest smartphones. This article explains how to get water from the phone charging port. And what steps are required for complete drying? It also covers tips to prevent device damage and save repair costs.
7 Easy Ways To Remove Water From Your Charging Port:
- Leave Your Phone Out To Dry
- Use a Toothpick To Remove Debris
- By Using Kitchen Tissue
- Use Compressed Air
- Use Rice
- To Use Cloth
- Contact Customer Support
1. Leave Your Phone Out To Dry:
Keep your phone in a dry environment like a cupboard for a few hours so that it stays dry. You can also place your phone in front of the fan so that your phone gets enough air to stay dry. What to do if your phone falls into the water? You can leave your phone near the window or in the sun for a few hours so that your phone gets enough air and warmth and dries quickly. However, when placing it outside or near a window, keep in mind that it should never come in contact with water again. Do not place your phone in front of a heater or bulb, as excessive heat from these appliances can damage your phone.
2. Use a Toothpick To Remove Debris:
Smartphone USB port compact. Use a toothpick or needle or paper pin to pull the water out of the lightning port. Now gently swab the phone with the charging port fronting the earth. Turn on the phone. If you do not see the moisture warning message, you are advised to use your smartphone.
3. By Using Kitchen Tissue:
Kitchen tissue papers are made to soak in water and oil. They have high liquid absorption properties. Use the insert inside and corner of the kitchen tissue phone charging port. Hold there for at least 5 seconds. Remove the corner, this method will work if it is wet. Repeat this process with the new corner each time. If you have to repeat this process many times, shred the paper into small pieces
4. Use Compressed Air:
Try using compressed air to clean your charging port. Make sure there is no debris near the face of the charging port, and then use compressed air can force the pressure in and out. This is one of the fastest ways to drain water from USB charging ports. And the best way to clean it. This point helps to save the phone charging port if the amount of water in the charging port is high. Although it does not help you to remove moisture from the phone charging port or phone, it does remove a large amount of water from the phone charging port. You can repeat this process several times until you feel that the phone charging port is secure. For moisturizing, use any of the procedures mentioned in the following simple ways.
5. Use Rice:
The most common way people try to get water out of their phones is rice. To dry the charging port, place your phone in a cup of dry rice as soon as it comes in contact with water. Keep your phone in the cup for at least 2 hours or overnight before checking to see if the port is dry.
6. To Use Cloth:
Use a cotton swab or soft cloth to soak up the remaining water inside the lightning port. Place a cotton swab or cloth over the face of the phone charging port. Press the cotton swab on the lightning port opening. The contact should be as tight as possible. Repeat this process two to three times with multiple cleansers. Cotton is the most absorbent material. Water droplets get trapped inside the cotton fibers. Charging ports are small, but cotton fibers are small. Be sure to pick up these remaining fiber strands with tweezers.
7. Contact Customer Support:
If all else fails, get the device out of the store to request a service or replacement. Any parts that are defective or broken due to liquid exposure. For the latest Android devices, check with your phone customer support about service and warranty. Warranty and service conditions vary from brand to brand. Use an alternative phone borrowed from a family member or friend. Do not turn on your phone to make calls. Do not use the phone charging port in any way before talking to customer support.
If you accidentally drop your phone into the water, do not panic. First, turn off your phone and take it home in a warm place. Then, with a clean, soft towel, get rid of excess ice. You can try the above methods to remove moisture and dry your phone. Alternatively. In case any of the policies fail to work for you, contact your phone manufacturer’s nearest customer care.